The short answer
Landlords must arrange an annual gas safety check by a Gas Safe registered engineer. They must also manage legionella risk and keep water, gas and heating installations in repair. This page is a guide, not legal advice, so check the sources for your own tenancy.
Gas safety: the annual check
The Health and Safety Executive sets out the rules on its landlord gas safety page. In short:
- A Gas Safe registered engineer must carry out a gas safety check every year.
- You must give the tenant a copy of the record within 28 days.
- You must keep the record for two years.
- A new tenant must receive a copy before they move in.
Our engineers are Gas Safe registered, so you can ask to see the card. Check any engineer’s card before they start work, because the card lists what they may do. Our boiler repair service takes requests through the form.
Carbon monoxide
HSE strongly recommends carbon monoxide alarms as a precaution. An alarm is not a replacement for servicing, although it adds a layer of safety. Tell tenants what the alarm sounds like and what to do. Our guide to carbon monoxide at home explains the signs and the steps to take.
Repairs under section 11
Section 11 of the Landlord and Tenant Act 1985 covers repairs in many short residential tenancies. It deals with installations for water, gas, electricity and sanitation. It also covers space heating and heating water. The wording has details and limits, so read the Act on legislation.gov.uk and ask a solicitor if you are unsure.
In practice, a failed boiler or a leaking pipe is usually a landlord’s job to fix. Tenants should report faults early, because delay can raise the damage and the cost. Keep a dated record of every report and every repair.
Legionella
HSE says those in control of premises must assess and manage the risk from legionella in water systems. Its Legionnaires’ disease pages explain the basics. For a small rented home the risk assessment may be simple, but it still needs doing. Empty properties between lets need thought, since water can sit still in the pipes.
Drains and blockages
Blocked drains are a frequent landlord problem. Who pays depends on where the blockage sits. A private drain serving one home is usually the owner’s job. A lateral drain or public sewer belongs to the water company. Read who is responsible for a blocked drain. Then see how to report a blocked drain or sewer. For gullies and yard drains, see a blocked drain outside the house.
Tenants can help by binning wipes and fat. Share the rules from Thames Water’s Bin it page, because they apply anywhere. Only pee, poo and toilet paper go down the toilet.
Heating
A cold house is more than a comfort issue, so act on heating reports quickly. Ask tenants to check the boiler pressure gauge first, and share our boiler pressure guide. If the boiler shows an error, send them to boiler fault codes. If some radiators stay cold, see radiator cold spots.
When a boiler keeps failing, replacement may give better value. Our new boiler cost guide sets out typical prices from two sources.
Planned care for several properties
Landlords with several homes often benefit from planned checks. Our notes on commercial plumbing explain planned and reactive care. Our commercial plumbing service covers rented homes and shared buildings. Ask about records, because dated notes help with insurance and with tenants.
A simple yearly checklist
Use this as a starting point.
- Book the gas safety check and keep the record.
- Review the legionella risk assessment.
- Check smoke and carbon monoxide alarms.
- Ask tenants about leaks, damp and slow drains.
- Check the boiler for pressure and error codes.
- Keep a folder of reports and repairs.
Frequently asked questions
Who pays for a broken boiler in a rental?
Usually the landlord, because heating installations fall under the repair duty. Still, check your tenancy and the Act.
How often is a gas safety check needed?
Every year, according to HSE, although you should check the rules for your tenancy.
Can a tenant refuse access for the check?
Talk to the tenant early and give notice. Keep a record of your attempts, because it may matter later.
Get help
Use the online form to describe the property and the fault. Mark it urgent for leaks or no heating in cold weather. Our emergency plumber service takes requests at any hour. Browse all our services or the areas we cover. Add your town and a short description, because that helps an engineer get back to you.
In Northampton, see plumbers in Northampton. Around Rugby, see plumbers in Rugby. In Wellingborough, see plumbers in Wellingborough. Near Banbury, see plumbers in Banbury. These pages list local details, since coverage varies from town to town.
We cover Northampton and a 30-mile radius, while the request form is open 24/7. Our engineers are Gas Safe registered.
Last updated 2 November 2026
Related Services
Boiler Repair & Installation
Boiler repair and installation across Northampton and towns within 30 miles. Engineers on gas jobs are Gas Safe registered, because the law requires it.
Learn more →Commercial Plumbing
Plumbing for shops, offices, kitchens and rented homes across Northampton and towns within 30 miles. Tell us what the site needs, since every site differs.
Learn more →Emergency Plumber
Help for burst pipes, bad leaks and heating failures across Northampton and towns within 30 miles. The request form is open 24/7, so you can send details while the problem is fresh.
Learn more →