Skip to main content
Hot Water 5 min read

Hot water cylinder replacement cost: vented vs unvented

The short answer

Two UK guides put a vented cylinder at roughly £750 to £1,500 fitted. They put an unvented cylinder at roughly £900 to £3,000. Both exclude VAT. The type, size and pipework decide where your job falls, because no two homes match.

These are guides for the UK, not our prices. Use the request form for a written quote, since every home differs.

Price ranges from two sources

Rosebourne Plumbing gives £800 to £1,500 for a vented cylinder. It gives £1,500 to £3,000 for an unvented one. BestBuilders gives £750 to £1,400 for a vented copper cylinder, while its unvented range is £900 to £3,000. Both sets of figures exclude VAT.

  • Vented: about £750 to £1,500.
  • Unvented: about £900 to £3,000.

The ranges overlap, but unvented cylinders cost more at the top end. Prices also change from year to year, so treat them as a guide.

Vented or unvented?

A vented cylinder takes its water from a tank, usually in the loft. The flow depends on the height of that tank. It is simple, so it suits many older homes.

An unvented cylinder runs from the mains. It can give stronger flow, and it needs no loft tank. However, it also needs extra safety parts, so it costs more to fit.

Choose by flow, space and budget. A good installer will explain the trade-offs. They will also check your mains supply, since an unvented cylinder needs a good one.

Why the qualification matters

Unvented cylinders hold hot water under pressure, so the fitter needs the right training. Approved Document G covers hot water safety and expects the installer to be competent. The government page on Approved Document G explains the rule.

The usual qualification is known as G3. We are G3 qualified. Whoever you choose, ask for proof, and ask how they will meet the building rules. Our guide on how to choose a plumber lists more checks.

What changes the price

Several things move the figure, although size matters most.

  • The size of the cylinder, in litres.
  • The type and the make.
  • Whether you swap like for like or change type.
  • New pipework, valves or a new controller.
  • Access, such as a tight airing cupboard or a loft.

A like-for-like swap is usually the cheapest. Changing from vented to unvented adds work, because the pipes and safety parts change.

Signs a cylinder needs replacing

Look for these warning signs, because early action limits the damage.

  • Water stains or drips around the cylinder.
  • Hot water that runs out quickly or stays lukewarm.
  • Rust marks, or a cylinder that is very old.
  • Noises, such as banging or rumbling.

A leak is urgent. Turn off the water at the stop tap. If you are not sure where it is, read where your stop tap is likely to be. Our water tank and cylinder service covers repairs and replacements.

Is it the cylinder or something else?

Weak hot water does not always mean a failed cylinder. The boiler, a heater or a control may be at fault. Our no hot water guide walks through the checks. If the boiler shows an error, read boiler fault codes. Never open a boiler casing.

If the boiler is old as well, compare costs. Our new boiler cost guide sets out typical prices. Radiators that stay cold are a separate problem, so see radiator cold spots. The boiler pressure guide covers pressure problems.

Other costs to plan for

A new cylinder may come alongside other work. A bathroom refit can change how much hot water you need, so the bathroom fitting cost guide is worth reading. An urgent failure may need out-of-hours help. The guide to what an emergency plumber costs shows typical rates.

Frequently asked questions

How long does a cylinder last?

It varies with the type, the water and the care it gets. Ask the installer what warranty comes with the new cylinder, because terms differ.

Do I need a new cylinder or just a repair?

A leak from the tank usually means replacement. A failed heater or valve may be a smaller repair, although an engineer must confirm.

Can I fit an unvented cylinder myself?

No. It needs a qualified installer, because the cylinder holds hot water under pressure.

Ask about your cylinder

Our water tank and cylinder service takes requests through the online form. Our boiler repair service covers boilers. Browse all our services or the areas we cover. Add your town and a short description, because that helps an engineer get back to you.

In Northampton, see plumbers in Northampton. Around Kettering, see plumbers in Kettering. In Market Harborough, see plumbers in Market Harborough. Near Thrapston, see plumbers in Thrapston. Each page explains local coverage, while the form works for every town.

P
Plumbers Northampton 24/7

We cover Northampton and a 30-mile radius, while the request form is open 24/7. Our engineers are Gas Safe registered.

Last updated 12 November 2026

Request a quote

Need Help Now?

Request a Quote

Plumbers serving Northampton and a 30-mile radius, while the form stays open 24/7.

Need a Plumber in Northampton?

Send a request through the form, because it is open 24/7. Mark it urgent if water is escaping.

Request a quote