Skip to main content
Emergency Plumbing 4 min read

Where is my stop tap? How to find it, test it and free a stiff one

The short answer

The stop tap is usually under the kitchen sink or where the mains pipe enters the house. Turn it clockwise to shut the water off. Find it now and test it, because a stiff tap is no help in an emergency.

Why it matters

The stop tap cuts the water supply to your whole home. In a burst or a bad leak, it is the first thing to turn off. Every minute counts, since water spreads fast.

The Met Office lists the stop tap as the first step in its advice on frozen or burst pipes. Meanwhile, our guide to the first 10 minutes of a plumbing emergency shows what to do next.

Where to look

Start with the most common places, although layouts differ.

  • Under the kitchen sink, where the mains pipe rises.
  • Where the mains pipe enters the house, often near the front door or in a utility room.
  • A cupboard or the garage, in some homes.
  • Under the stairs, in some older layouts.

Look for a small tap or lever on a pipe that comes up from the floor or through a wall. In some homes the main tap sits near the water meter. If you still cannot find it, trace the cold pipe back from the kitchen tap.

Some homes also have an outside stop tap in a box near the boundary. Ask your water company if you think yours does, because the box may not be yours. Do not open boxes in a road or path unless you know they are yours.

How to turn it off

Turn the tap clockwise until it stops, which closes the valve. Then open a cold tap to check the flow has stopped. If you pay by meter, note the reading, since it helps with any later query.

Turn the tap back on slowly when the repair is done. Open a tap first to let the air out, because the pipes will have filled with air.

Test it twice a year

The Met Office advises testing your stop tap every six months. Close it, check a tap runs dry, then open it again. A tap that moves freely will work when you need it.

Put the date in your diary. A quick test also shows if the tap drips at the spindle, because that means it needs attention.

What if it is stiff or stuck

Old stop taps can seize if nobody has moved them for years. Use steady, even pressure and avoid sudden force. A tap that will not move may break if you push hard, and that can cause the leak you were trying to stop.

If it will not turn, ask a plumber to replace it. Our emergency plumber service covers urgent faults. Costs vary, and our guide to what an emergency plumber costs shows typical ranges from two sources.

Other valves worth knowing

Many homes have smaller isolation valves under sinks, basins and toilets. These cut the water to one fixture only, so they suit a dripping tap or a leaking toilet.

Heating has its own valves. Our boiler pressure guide explains the filling loop on many sealed systems. Always follow the manual, because every boiler differs, and never open the boiler casing.

A stop tap and other emergencies

A stop tap helps with leaks from clean water pipes. It does not help with sewage or a blocked drain. For those cases, read a blocked drain outside the house. Then see how to report a blocked drain or sewer.

In cold weather, frozen pipes can burst when they thaw. Read frozen pipes in Northamptonshire before winter. The signs of a burst pipe can warn you early. If your hot water stops, see no hot water: what to check.

Before you hire anyone, read how to choose a plumber, since it lists the checks to make.

Frequently asked questions

Which way do I turn the stop tap?

Clockwise, to close it. Anti-clockwise opens it, although a very old tap may differ.

Should I turn the water off when I go on holiday?

Many people do, because it limits the damage from a leak while the home is empty. Check your insurance policy for any conditions.

Can I replace a stop tap myself?

It is a job for a plumber, because the supply must be cut off further up the line. Ask a plumber to do it.

Ask for help

Use the online form and mark your request urgent if water is escaping. Our emergency plumber service and burst pipe service take requests at any hour. Browse all our services or the areas we cover. Add your town and a short description, because that helps an engineer get back to you.

In Northampton, see plumbers in Northampton. Around Long Buckby, see plumbers in Long Buckby. In Brixworth, see plumbers in Brixworth. Near Towcester, see plumbers in Towcester. Coverage differs by area, so check the page for yours.

P
Plumbers Northampton 24/7

We cover Northampton and a 30-mile radius, while the request form is open 24/7. Our engineers are Gas Safe registered.

Last updated 9 November 2026

Request a quote

Need Help Now?

Request a Quote

Plumbers serving Northampton and a 30-mile radius, while the form stays open 24/7.

Need a Plumber in Northampton?

Send a request through the form, because it is open 24/7. Mark it urgent if water is escaping.

Request a quote